Unlike plastic coated steel fences, aluminized chain link fence has only one color finish for the coated surface: aluminum self-color. The hot dipped aluminum coating on the wire surface provides many years of service life. This is the most popular and low cost treatment for the chain link fence system. The disadvantage of aluminized steel chain link fence is it has only one color, not like plastic coating with multi-color choices.
The chain link fabric is made with pre-aluminized wire via a flat spiral linking structure. It is designed for years of maintenance-free protection. Like aluminum coated chain link fencing system, all the steel fence parts and components are hot-dipped zinc coated and can be used for 12 years.
Aluminized chain link fence fabrics have two selvage choices: knuckle ending or twisted wire tops. Knuckle top aluminum coated fence is the traditional fencing style while the twisted wire top fence has higher security.
Together with barbed or razor wires, a complete security fencing system of aluminized steel fence system can be built. Fence posts, beams, fence fabrics and chain link gates are also supplied.
Aluminized chain link fence has the features of resistance to moisture, corrosion resistance, excellent resistance to sudden temperature changes and high durability.
Diameter Wire: 3mm , 4 mm , 5mm
Aperture: 3 x 3 , 4 x 4 , 5 x 5
Panel Width: 1m, 1.5m, 2.0m, 2.5m, 5m.
Package: 20m/roll, 25m/roll, 30m/roll, 50m/roll, 100m/roll, or 35kg/roll, 50kg/roll.
Benefits of Coated steel chain link fence:
1. Heavier and more thorough coating with no flaking and bare trim ends.
2. Additional protective coating to prevent while rust.
3. All components of fence systems are zinc coated.
4. Consistently meets ASTM specifications.
Illustration of Selvage Finishes for Aluminum Coated Steel Fences:
Knuckling - This term is used to describe the type of selvage obtained by interlocking adjacent pairs of wire ends and then bending the wire ends back into a closed loop. Usually knuckle is standard unless otherwise stated.
Twisting - This term is used to describe the type of selvage obtained by twisting adjacent pairs of wire ends together in a closed helix of 1-1/2 machine turns, which is equivalent to three full twists, and cuffing the wire ends at a sharp angle to provide sharp points. The wire ends beyond the twist shall be at least 1/4 inch (6.4mm) long.
Advise us the wire, aperture, material, knuckling or twisted style, fence panel width and length, when you order from us.
|Aluminized Steel Chain Link Fence for Perimeters||Knuckle Selvage of Aluminized Chain Link Wires|
|Twisted Selvage of Aluminized Steel Chain Link Mesh Fabrics||Aluminized Steel Fencing System with Concertina Wire|
|Chain Link Wire Used together with Barbed Wire Barriers|